FUELBRIGHT FUEL TANK WATER SOAKER 10 X 30CM (ABSORBS 1.59 LITRES)

£20.88 £17.40
SKU
WS3

FUELBRIGHT FUEL TANK WATER SOAKER 10 X 30CM (ABSORBS 1.59 LITRES)


This water soaker is made with a super absorbent polymer with mesh filter containment, this high absorbency allows this water soaker to efficiently remove water build-up from condensation in fuel tanks.

Condensation commonly builds in fuel tanks but is especially prevalent in both marine and agricultural equipment that may be stored outside for long periods of time. This build up can cause damage to expensive and critical fuel injection components, removing this built up water from a fuel tank can help to improve longevity of the engine and avoid expensive repairs.

This water soaker lays at the bottom of the fuel tank and will remove all current water build up and prevent any future build up.


How to use:

1.     Open fuel tank, ensuring that there are not sources of ignition nearby.

2.     Slowly lower the soaker into the fuel tank using the cord attached, once it has settled on the bottom of the tank the cord will become slack.

3.     Ensure the cord is secured and accessible so the water soaker can be retrieved when full (attaching to the underside of a fuel cap is a great way to secure the cord)


Water Soaker Care:

  • Check your water soaker regularly (monthly is best).
  • Replace not later than every 3 months.
  • The water soaker is full when the nylon bladder has fully expanded into the mesh and should be replaced.
  • Ensure the soaker is placed in the tank so it does not obstruct sender units or the fuel outlet.
  • Always dispose of your soaker in accordance with local regulations.
More Information
Weight (KG) 0.26
Country of Manufacture United Kingdom
Manufacturer FuelBright
EAN/UPC 5060624810138