PARKER RACOR WATER SENSOR PROBE KIT FOR TURBINE SERIES RK21069

£61.92 £51.60
SKU
RK21069

RACOR WATER SENSOR PROBE KIT FOR TURBINE SERIES RK21069

Water sensors activate when water contacts the sensor tips. Air bubbles or fuel leakage appearing from sensor area may indicate that it is loose or O-ring is damaged. Tighten or disassemble and inspect.

This feature alerts the operator of a high-water condition. The bowl must be drained of water at the earliest convenience. A Racor water detection module is needed to work with the inbowl sensor. The unit should activate when the water reaches the sensor tips (and when they measure below 47,000 or 100,000 ohms of resistance, depending on the detection module used). If not, the tips may be fouled with a coating. Remove the sensor and clean the tips with a cloth. Run a jumper wire between the tips with the ignition ON to test the system. Difficulties usually lie in the wire connections, power source, or an independent ground.

More Information
Weight (KG) 0.02
Country of Manufacture United States
Manufacturer Parker Racor